Three-Part CSI Specifications
for A&I Products

View our growing library of technical documents, including three-part CSI specs, CAD drawings, and digital models of our products, making specification an easy process that inspires confidence in their long-lasting quality.

We’re not afraid to get technical.

 

As a building product manufacturer, we recognize that building relationships with architects and specifiers begins with showing you what we are made of. A hallmark of our relationship-building process with architectural practitioners is transparency, and a willingness to go deep on what makes our products the right choice for your specifications.

Here, you can easily browse an online version of our three-part CSI specifications, or download a PDF version below.

Mini Blinds
Horizontal Blinds
Vertical Blinds
Cellular Shades
Roller Shades
Perfect Fit
Commercial Collection

MINI BLINDS

  • Headrail: .024 inch steel. Treated to resist corrosion. Baked-on paint, color coordinated to slats.

    Bottom Rail: .024 inch steel. Treated to resist corrosion. Baked-on paint, color coordinated to slats.

    Tilter: Worm gear construction, enclosed in housing of engineering polymer; gear and shaft of engineering polymer with slip clutch mechanism. May be positioned at right or left with or without cord lock.

    Tilt Rod: Solid steel with corrosion resistant finish.

    Tilt Wands: Extruded, clear solid acrylic wand.

    Cord Lock: Snap-In-Design and incorporates stainless steel wear guard over which cords pass and a floating type locking pin. Locking pin shall be free of abrasive teeth and offer minimum wear to the cord

    Lift Cords: Two-ply polyester cord filler and braided polyester jacket.

    Braided Ladders: 100 percent polyester yarn, color coordinated with the slats.

    Installation Brackets: .042 inch steel box brackets. Blinds over 48 inches shall have intermediate supports.

    Tassel: Break away safety tassel complies with all safety requirements.

  • Slats:

    • Aluminum Heat Treated and Tempered, 1 inch wide by .006 inch thick.

    • Aluminum Heat Treated and Tempered, 1 inch wide by .008 inch thick.

    Maximum Width: 132 inches (3353 mm).

    Maximum Drop: 126 inches (3200 mm).

    Slat Spacing: 22.5 mm spacing with approximately 13 slats per foot of drop.

    Mounting:

    • Inside mount.

    • Outside mount.

    Control Manual:

    • Tilt Only-Center of Headrail

    • Split control LR.

    • Split control RL.

    • Same side control RR.

    • Same side control LL.

    Head Rail: Standard duty 1 inch by 1 inch.

    Bottom Rail: C-Shape.

    Valance: Double Slat with clips to mount.

    Slat Color as selected by Architect from fabricator’s available selections.

  • Slats:

    • Aluminum Heat Treated and Tempered, 1 inch wide by .006 inch thick.

    • Aluminum Heat Treated and Tempered, 1 inch wide by .008 inch thick.

    Maximum Width: 132 inches (3353 mm).

    Maximum Drop: 126 inches (3200 mm).

    Slat Spacing: 22.5 mm spacing with approximately 13 slats per foot of drop.

    Mounting:

    • Inside mount.

    • Outside mount.

    Control Manual:

    • Tilt Only-Center of Headrail

    • Split control LR.

    • Split control RL.

    • Same side control RR.

    • Same side control LL.

    Head Rail: Standard duty 1 inch by 1 inch.

    Bottom Rail: C-Shape.

    Valance: Double Slat with clips to mount.

    Slat color as selected by Architect from fabricator's available selections.

  • Slats:

    • Aluminum Heat Treated and Tempered, 1 inch wide by .006 inch thick.

    • Aluminum Heat Treated and Tempered, 1 inch wide by .008 inch thick.

    Maximum Drop: 126 inches (3200 mm).

    Slat Spacing: 18.5 mm spacing with approximately 17 slats per foot of drop.

    Mounting:

    • Inside mount.

    • Outside mount.

    Control Manual:

    • Tilt Only-Center of Headrail

    • Split control LR.

    • Split control RL.

    • Same side control RR.

    • Same side control LL.

    Head Rail: Standard duty 1 inch by 1 inch.

    Bottom Rail: C-Shape.

    Valance: Double Slat with clips to mount.

    Slat color as selected by Architect from fabricator's available selections.

  • Slats:

    • Aluminum Heat Treated and Tempered, 1 inch (25 mm) wide by .006 inch thick.

    • Premium Aluminum Heat Treated and Tempered, 1 inch (25 mm) wide by .008 inch thick.

    Maximum Width: 132 inches (3353 mm).

    Maximum Drop: 126 inches (3200 mm).

    Slat Spacing: 22.5 mm spacing with approximately 13 slats per foot of drop.

    Mounting:

    • Inside mount.

    • Outside mount.

    Control Manual:

    • Tilt Only-Center of Headrail

    • Split control LR.

    • Split control RL.

    • Same side control RR.

    • Same side control LL.

    • Head Rail: Standard duty 1.5 inch by 1 inch.

    • Bottom Rail: Standard duty sculpted.

    Valance: Double Slat with clips to mount.

    Slat color as selected by Architect from fabricator's available selections.

  • Slats:

    • Aluminum Heat Treated and Tempered, 1 inch (25 mm) wide by .006 inch thick.

    • Premium Aluminum Heat Treated and Tempered, 1 inch (25 mm) wide by .008 inch thick.

    Maximum Width: 132 inches (3353 mm).

    Maximum Drop: 126 inches (3200 mm).

    Slat Spacing: 21.5 mm spacing with approximately 14 slats per foot of drop.

    Mounting:

    • Inside mount.

    • Outside mount.

    Control Manual:

    • Tilt Only-Center of Headrail

    • Split control LR.

    • Split control RL.

    • Same side control RR.

    • Same side control LL.

    Head Rail: Standard duty 1.5 inch by 1 inch.

    Bottom Rail: Standard duty sculpted.

    Valance: Double Slat with clips to mount.

    Slat color as selected by Architect from fabricator's available selections.

  • Slats:

    • Aluminum Heat Treated and Tempered, 1 inch (25 mm) wide by .006 inch thick.

    • Aluminum Heat Treated and Tempered, 1 inch (25 mm) wide by .008 inch thick.

    Maximum Width: 132 inches (3353 mm).

    Maximum Drop: 126 inches (3200 mm).

    Slat Spacing: 18.5 mm spacing with approximately 17 slats per foot of drop.

    Mounting:

    • Inside mount.

    • Outside mount.

    Control Manual:

    • Tilt Only-Center of Headrail.

    • Split control RR.

    • Split control LL.

    • Same side control LR.

    • Same side control RL.

    Head Rail: Standard duty 1.5 inches by 1 inch.

    Bottom Rail: Sculpted.

    Valance: Double Slat with clips to mount.

    Slat color as selected by Architect from fabricator's available selections.

HORIZONTAL BLINDS

  • Headrail: .024 inch steel. Treated to resist corrosion. Baked-on paint, color coordinated to slats.

    Bottom Rail: Steel, thickness varies with product type. Treated to resist corrosion. Baked-on paint, color coordinated to slats.

    Tilter: Worm gear construction, enclosed in housing of engineering polymer; gear and shaft of engineering polymer with slip clutch mechanism. May be positioned at right or left with or without cord lock.

    Tilt Rod: Solid steel with corrosion resistant finish.

    Tilt Wands: Extruded, clear solid acrylic wand.

    Cord lock: Snap-In-Design and incorporates stainless steel wear guard over which cords pass and a floating type locking pin. Locking pin shall be free of abrasive teeth and offer minimum wear to the cord

    Lift Cords: Two-ply polyester cord filler and braided polyester jacket.

    Braided Ladders: 100 percent polyester yarn, color coordinated with the slats.

    Installation Brackets: .042 inch steel box brackets. Blinds over 48 inches shall have intermediate supports.

    Tassel: Break away safety tassel complies with all safety requirements

    Can be motorized for tilt model only.

  • Slats:

    • Aluminum Heat Treated and Tempered, 2 inches wide by .008 inch thick.

    • Maximum Width: 122 inches (3048 mm).

    • Maximum Drop: 120 inches (3099 mm).

    • Slat Spacing: 44 mm spacing with 7 slats per foot of drop.

    Control Electric: Coordinate with Motors and Controls specified in Section 12 25 13 - Motorized Drapery Rods.

    • Tilt Only-Center of Headrail

    • Split control LR.

    • Split control RL.

    • Same side control LR.

    • Same side control RL.

    Control Manual:

    • Tilt Only-Center of Headrail

    • Split control LR.

    • Split control RL.

    • Same side control RR.

    • Same side control LL.

    Mounting:

    • Inside mount.

    • Outside mount.

    Head Rail: 2 inch by 2 inch.

    Bottom Rail: Enclosed steel, color coordinated.

    Valance:

    • Single Slat with clips to mount.

    • Double Slat with clips to mount.

    Decorative Tape: 1-1/2 inch wide woven, 100 percent cotton cloth tape ladder, color coordinated with the slats.

    Slat color as selected by Architect from fabricator's available selections.

  • Slats:

    • Polymer PVC, 2 inches wide.

    • Maximum Width: 120 inches (3099 mm).

    • Maximum Drop: 114 inches (2895 mm).

    • Slat Spacing: 44 mm spacing with 7 slats per foot of drop.

    Control Electric: Coordinate with Motors and Controls specified in Section 12 25 13 - Motorized Drapery Rods.

    • Tilt Only-Center of Headrail

    • Split control LR.

    • Split control RL.

    • Same side control LR.

    • Same side control RL.

    Control Manual:

    • Tilt Only-Center of Headrail

    • Split control LR.

    • Split control RL.

    • Same side control RR.

    • Same side control LL.

    Mounting:

    • Inside mount.

    • Outside mount.

    Head Rail: 2 inch by 2 inch.

    Bottom Rail: Enclosed steel, color coordinated.

    Valance:

    • Single Slat with clips to mount.

    • Double Slat with clips to mount.

    Decorative Tape: 1-1/2 inch wide woven, 100 percent cotton cloth tape ladder, color coordinated with the slats.

    Slat color as selected by Architect from fabricator's available selections.

  • Slats: Faux (Foam), 2 inches wide by 1/8 inch thick.

    Maximum Width: 108 inches (2743 mm).

    Maximum Drop: 108 inches (2743 mm).

    Slat Spacing: 44 mm spacing with 7 slats per foot of drop.

    Control Electric: Coordinate with Motors and Controls specified in Section 12 25 13 - Motorized Drapery Rods.

    • Tilt Only-Center of Headrail

    • Split control LR.

    • Split control RL.

    • Same side control LR.

    • Same side control RL.

    Control Manual:

    • Tilt Only-Center of Headrail

    • Split control LR.

    • Split control RL.

    • Same side control RR.

    • Same side control LL.

    Mounting:

    • Inside mount.

    • Outside mount.

    Head Rail: 2 inch by 2 inch.

    Bottom Rail: Trapezoid faux wood, color coordinated.

    Valance: Royal.

    Decorative Tape: 1-1/2 inch wide woven, 100 percent cotton cloth tape ladder, color coordinated with the slats.

    Slat color as selected by Architect from fabricator's available selections.

  • Slats: Faux (Foam), 2-1/2 inches wide by 1/8 inch thick.

    Maximum Width: 108 inches (2743 mm).

    Maximum Drop: 108 inches (2743 mm).

    Slat Spacing: 44 mm spacing with 7 slats per foot of drop.

    Control Electric: Coordinate with Motors and Controls specified in Section 12 25 13 - Motorized Drapery Rods.

    • Tilt Only-Center of Headrail

    • Split control LR.

    • Split control RL.

    • Same side control LR.

    • Same side control RL.

    Control Manual:

    • Tilt Only-Center of Headrail

    • Split control LR.

    • Split control RL.

    • Same side control LR.

    • Same side control RL.

    Mounting:

    • Inside mount.

    • Outside mount.

    Head Rail: 2 inch by 2 inch.

    Bottom Rail: Trapezoid faux wood, color coordinated.

    Valance: Royal.

    Slat color as selected by Architect from fabricator's available selections.

  • Slats: Basswood, 2 inches wide by 1/8 inch thick.

    Maximum Width: 96 inches (2438 mm).

    Maximum Drop: 120 inches (3048 mm).

    Slat Spacing: 44 mm spacing with 7 slats per foot of drop.

    Control Electric: Coordinate with Motors and Controls specified in Section 12 25 13 - Motorized Drapery Rods.

    • Tilt Only-Center of Headrail

    • Split control LR.

    • Split control RL.

    • Same side control LR.

    • Same side control RL.

    Control Manual:

    • Tilt Only-Center of Headrail

    • Split control LR.

    • Split control RL.

    • Same side control LR.

    • Same side control RL.

    Mounting:

    • Inside mount.

    • Outside mount.

    Head Rail: 2 inch by 2 inch.

    Bottom Rail: Trapezoid basswood, color coordinated.

    Valance: Royal.

    Decorative Tape: 1-1/2 inch wide woven, 100 percent cotton cloth tape ladder, color coordinated with the slats.

    Slat color as selected by Architect from fabricator's available selections.

VERTICAL BLINDS

  • Headrail Channel: Anodized aluminum 1-3/4 inches (44.45 mm) wide by 1-1/4 inches (31.75 mm) high by .040 inch (1.02 mm) minimum wall thickness extending the width of the blind. Available in baked enamel ivory or white.

    Traversing: Traverse left to right or right to left by means of a wand control.

    Wheels: Each carrier shall traverse on self-lubricating wheels to reduce draw force.

    Tilt Rod: Extruded aluminum, 4 prong with diameter of 0.235 inch (6 mm).

    Rotation: Wand control provides 180 degree rotation to each vane stem simultaneously through a gear system in the control housing by turning tilt rod actuating a plastic worm and spur gear assembly in each vane carrier. System keeps louvers fixed until reset by controls.

    End Control: Each headrail channel equipped with end control housings made of high quality plastic. End controls are covered to enclose sprockets and rotation rod ends.

    Carriers: Each carrier fabricated of high quality plastic. Carriers provided with an independent self-aligning clutch mechanism in each louver carrier, allowing less friction for self-alignment. Shaft walls are made of reinforced plastic. Vane stem is fabricated of clear plastic and shall be centered, allowing the track to be reversible. Louvers rotate 180 degrees by a 4 prong pinion rod.

    Spacing: Heavy duty self-lubricating plastic link system. Normal spacing is a minimum of 3/8 inch less than louver width.

  • Slats: PCV, 3-1/2 inches wide by .002 inch thick.

    Minimum Width, One Way: 12 inches (305 mm).

    Maximum Width, One Way: 120 inches (3048 mm).

    Minimum Drop: 10 inches (254 mm).

    Maximum Drop: 144 inches (3657 mm).

    Maximum Area: 120 SF (3048 sm).

    Mounting:

    • Inside mount bracket.

    • Outside mount bracket.

    Slat color as selected by Architect from fabricator's available selections.

CELL SHADES

  • Material: High Quality Spun lace non-woven 100 percent polyester fabric.

    • Single Cell 3/8 inch.

    • Single Cell 3/4 inch.

    • Treated to meet NFPA 701 fire retardant standards.

    • Color as selected by Architect from fabricator's available selections.

    Maximum Width: 84 inches (2134 mm).

    Maximum Drop: 82 inches (2083 mm).

    Control Manual:

    • Lift Ease.

    • Cordless.

    • Standard control.

    • Standard TD/BU.

    • Cordless TD/BU.

    Control Electric: Coordinate with Motors and Controls specified in Section 12 25 13 - Motorized Drapery Rods.

    • Lift Ease.

    • Cordless.

    • Standard control.

    • Standard TD/BU.

    • Cordless TD/BU.

    Mounting:

    • Inside mount.

    • Outside mount.

    Head Rail:

    • Standard head rail.

    • Two on one head rail.

  • Material: High Quality Spun lace non-woven 100 percent polyester fabric

    • Double Cell 7/16 inch.

    • Treated to meet NFPA 701 fire retardant standards.

    • Color as selected by Architect from fabricator's available selections.

    Maximum Width: 84 inches (2134 mm).

    Maximum Drop: 82 inches (2083 mm).

    Control Manual:

    • Lift Ease.

    • Cordless.

    • Standard control.

    • Standard TD/BU.

    • Cordless TD/BU.

    Control Electric: Coordinate with Motors and Controls specified in Section 12 25 13 - Motorized Drapery Rods.

    • Lift Ease.

    • Cordless.

    • Standard control.

    • Standard TD/BU.

    • Cordless TD/BU.

    Mounting:

    • Inside mount.

    • Outside mount.

    Head Rail:

    • Standard head rail.

    • Two on one head rail.

  • Material: High Quality Spun lace non-woven 100 percent polyester fabric.

    • Single Cell 3/8 inch.

    • Single Cell 3/4 inch.

    • Treated to meet NFPA 701 fire retardant standards.

    • Color as selected by Architect from fabricator's available selections.

    Maximum Width: 84 inches (2134 mm).

    Maximum Drop: 82 inches (2083 mm).

    Control Manual:

    • Lift Ease.

    • Cordless.

    • Standard control.

    • Standard TD/BU.

    • Cordless TD/BU.

    Control Electric: Coordinate with Motors and Controls specified in Section 12 25 13 - Motorized Drapery Rods.

    • Lift Ease.

    • Cordless.

    • Standard control.

    • Standard TD/BU.

    • Cordless TD/BU.

    Mounting:

    • Inside mount.

    • Outside mount.

    Head Rail:

    • Standard head rail.

    • Two on one head rail.

ROLLER SHADES

  • Configuration:

    • Single Shades.

    • Dual Shades.

    Mounting Requirements:

    • Inside mount.

    • Outside mount.

    • Pocket/Headbox in Ceiling.

    Side Channels: Includes side enclosures, plastic guides, channel fasteners, L-channel bottom enclosure.

    • Inside mount: Color as selected by Architect from fabricator's available selection.

      • White.

      • Bronze.

      • Alabaster.

      • Anodized.

      • Black.

    • Outside mount: Color as selected by Architect from fabricator's available selection.

      • White.

      • Bronze.

      • Alabaster.

      • Anodized.

      • Black.

    Roller Tube: Extruded aluminum tube 6063-T5. Tube size to be determined by manufacturer based on window size, fabric selection and operation.

    Brackets: Cold rolled steel ASTM A1008. Color and size to be determined by Architect or manufacturer from fabricator's available selections.

    Operator: Clutch with metal or plastic chain

    • Silver color metal chain

    • Black plastic chain,

    • White plastic chain.

    • Ivory plastic chain.

    • Bead chain hold down: P-Clip

    Fascia: L shaped aluminum alloy extrusion to conceal shade roller and hardware. Color as selected by Architect from fabricator's available selections

    • 3 inch square.

      • White.

      • Bronze.

      • Alabaster.

      • Anodized.

      • Black.

    • 3 inch curved.

      • White.

      • Bronze.

      • Alabaster.

      • Anodized.

      • Black.

    • 4 inch square.

      • White.

      • Bronze.

      • Alabaster.

      • Anodized.

      • Black.

    • 4 inch curved.

      • White.

      • Bronze.

      • Alabaster.

      • Anodized.

      • Black.

    • 5.5 inch square.

      • White.

      • Bronze.

      • Alabaster.

      • Anodized.

      • Black.

    • 7 inch square.

      • White.

      • Bronze.

      • Alabaster.

      • Anodized.

      • Black.

    Headbox: Aluminum alloy extrusion with removable closure panel to minimize slot for shade passage but allowing access to shade for maintenance. Can be used without closure. Powder coat finish.

    • Mounting:

      • Inside pocket in ceiling.

      • Mounted to ceiling grid.

      • Mounted to surface of ceiling.

    • Finish:

      • White Powder Coat.

    Side Closure Panel Wall Clip: Aluminum alloy extrusion for site constructed ceiling recesses, provide removable closure panel to minimize slot for shade passage but allowing access to shade for maintenance.

    Hembar: Aluminum alloy extrusion.

    • External Hembar: Oval hem bar with end caps.

      • White.

      • Bronze.

      • Alabaster.

      • Anodized.

      • Black.

    • Slim Hembar: Slim hem bar with end caps. To be used with side channel and sill.

      • White.

      • Bronze.

      • Alabaster.

      • Anodized.

      • Black.

    • Internal Hembar: Aluminum extrusion enclosed in a fabric hem pocket with heat-welded seams and ends to match shade cloth selection.

    Shade fabric color and openness as selected by Architect from fabricator's available selections.

  • Configuration:

    • Single Shades.

    • Dual Shades.

    Mounting Requirements:

    • Inside mount.

    • Outside mount.

    • Pocket/Headbox in Ceiling.

    Side Channels: Includes side enclosures, plastic guides, channel fasteners, L-channel bottom enclosure.

    • Inside mount.

      • White.

      • Bronze.

      • Alabaster.

      • Anodized.

      • Black.

    • Outside mount.

      • White.

      • Bronze.

      • Alabaster.

      • Anodized.

      • Black.

    Roller Tube: Extruded aluminum tube 6063-T5. Tube size to be determined by manufacturer based on window size, fabric selection and operation.

    Brackets: Cold rolled steel ASTM A1008. Color and size to be determined by Architect or manufacturer from fabricator's available selections.

    Operator: Motor. Enclosed, maintenance free, reversible, tubular concealed inside roller tube.

    • Motor Type: To be determined by Architect / manufacturer based on window size, fabric selection and operation.

    • Motor Type: Low voltage wireless control. LT30 RTS 12V DC

    • Motor Type: Low voltage wireless control. Sonesse 30 RTS 24V DC

    • Motor Type: Low voltage wired control. Sonesse 30 RS485 24V DC

    • Motor Type: Low voltage wired control. Sonesse 30 DCT 24V DC

    • Motor Type: Line voltage wireless control. Sonesse 40 RTS 120V AC

    • Motor Type: Line voltage wired control. Sonesse 40 WT 120V AC

    • Motor Type: Line voltage wireless control. Altus 40 RTS 120V AC

    • Motor Type: Line voltage wired control. LS 40 120V AC

    • Motor Type: Line voltage wireless control. Sonesse 50 RTS 120V AC

    • Motor Type: Line voltage wired control. Sonesse 50 RS485 120V AC

    • Motor type: Line voltage wired control Sonesse 50 RA 120V AC

    Power Supply:

    • Power Supply Type:

      • To be determined by Architect / manufacturer

    • Power Supply Type

      • Low voltage reloadable battery tube 12 V DC

      • Low Voltage Ni-MH rechargeable battery tube 12 V DC

      • Low voltage solar panel recharge kit with Ni-MH rechargeable battery tube 12 V DC.

    • Power Supply Type:

      • Low voltage 24V DC transformer Plug-in Wall type

      • Low voltage 24 V DC transformer Plug-in Floor type

      • Low voltage 24 V DC transformer Plug-in Table/Shelf type

      • 5 Motor Power/Control Distribution Kit; one 5 Motor Power/Control Distribution Panel one 24V DC 10 Amp Power supply one 12 inch by 12 inch by 6.25 inch Enclosure.

    • Power Supply Type:

      • 5 Motor Power/Control Distribution Kit; One 5 Motor Power/Control Distribution Panel one 24V DC 10 Amp Power supply one 12 inch by12 inch by 6.25 inch Enclosure

      • 10 Motor Power/Control Distribution Kit; One 10 Motor Power/Control Distribution Panel one 24 V DC 10 Amp Power supply one 8 inch by 18 inch by 6.25 inch Enclosure

      • 15 Motor Power/Control Distribution Kit; One 15 Motor Power/Control Distribution Panel one 24 V DC 10 Amp Power supply one 18 inch by 18 inch by 6.25 inch Enclosure

      • 20 Motor Power/Control Distribution Kit; One 20 Motor Power/Control Distribution Panel one 24 V DC 10 Amp Power supply one 18 inch by 18 inch by 6.25 inch Enclosure.

    • Power Supply Type:

      • Low voltage 24V DC transformer Plug-in Wall type

      • Low voltage 24 V DC transformer Plug-in Floor type

      • Low voltage 24 V DC transformer Plug-in Table/Shelf type

      • 5 Motor Power/Control Distribution Kit; One 5 Motor Power/Control Distribution Panel one 24 V DC 10 Amp Power supply one 12 inch by 12 inch by 6.25 inch Enclosure.

    • Power Supply Type:

      • 110 V: three wire cable

      • 110 V: three wire cable with NEMA plug.

    • Power Supply Type:

      • 110 V; Maintained toggle switch

      • 110 V; Momentary toggle switch

      • 110 V; Maintained Paddle switch

      • 110 V; Momentary Paddle switch

      • 110 V; Maintained Double Pole Double Throw Paddle Switch.

    • Power Supply Type:

      • Three wire cable

      • Three wire cable with NEMA plug.

    • Power Supply Type: 110 V;

      • 110 V; Maintained toggle switch

      • 110 V; Momentary toggle switch

      • 110 V; Maintained Paddle switch

      • 110 V; Momentary Paddle switch

      • 110 V; Maintained Double Pole Double Throw Paddle Switch.

    • Power Supply Type:

      • 110 V: three wire cable

      • 110 V: three wire cable with NEMA plug.

    • Power Supply Type:

      • 110 V: three wire cable

      • 110 V: three wire cable with NEMA plug.

    • Power Supply Type: 110 V;

      • 110 V; Maintained toggle switch

      • 110 V; Momentary toggle switch

      • 110 V; Maintained Paddle switch

      • 110 V; Momentary Paddle switch

      • 110 V; Maintained Double Pole Double Throw Paddle Switch.

    Control: To be determined by Architect / manufacturer based on specific motor. Coordinate with specific motors.

    • Remote:

      • Single channel remote White/Silver/Black

      • Five channel remote White/Silver/Black

      • 16 channel remote White/Silver

      • 1/2/3/4/5 Wireless wall switch Black/Ivory/Almond.

    • Remote:

      • Single channel remote White/Silver/Black

      • Five channel remote White/Silver/Black

      • 16 channel remote White/Silver

      • 1/2/3/4/5 Wireless wall switch Black/Ivory/Almond.

      • RS485 wireless motor controller; can control 16 groups of up to 10 motors. Use this to connect to home or building light automation systems.

    • Switch:

      • Maintained toggle switch

      • Momentary toggle switch

      • Maintained Paddle switch

      • Momentary Paddle switch

      • Maintained Double Pole Double Throw Paddle Switch.

    • Remote:

      • Single channel remote White/Silver/Black

      • Five channel remote White/Silver/Black

      • 16 channel remote White/Silver

      • 1/2/3/4/5 Wireless wall switch Black/Ivory/Almond.

    • Switch:

      • Maintained toggle switch

      • Momentary toggle switch

      • Maintained Paddle switch

      • Momentary Paddle switch

      • Maintained Double Pole Double Throw Paddle Switch.

    • Remote:

      • Single channel remote White/Silver/Black

      • Five channel remote White/Silver/Black

      • 16 channel remote White/Silver

      • 1/2/3/4/5 Wireless wall switch Black/Ivory/Almond.

    • Switch:

      • Maintained toggle switch

      • Momentary toggle switch

      • Maintained Paddle switch

      • Momentary Paddle switch

      • Maintained Double Pole Double Throw Paddle Switch.

    • Remote:

      • Single channel remote White/Silver/Black

      • Five channel remote White/Silver/Black

      • 16 channel remote White/Silver

      • 1/2/3/4/5 Wireless wall switch Black/Ivory/Almond.

    • RS485 wireless motor controller; can control 16 groups of up to 10 motors. Use this to connect to home or building light automation systems.

    • Switch:

      • Maintained toggle switch

      • Momentary toggle switch

      • Maintained Paddle switch

      • Momentary Paddle switch

      • Maintained Double Pole Double Throw Paddle Switch.

    Fascia: L shaped aluminum alloy extrusion to conceal shade roller and hardware. Color as selected by Architect from fabricator's available selections.

    • 3 inch square.

      • White.

      • Bronze.

      • Alabaster.

      • Anodized.

      • Black.

    • 3 inch curved.

      • White.

      • Bronze.

      • Alabaster.

      • Anodized.

      • Black.

    • 4 inch square.

      • White.

      • Bronze.

      • Alabaster.

      • Anodized.

      • Black.

    • 4 inch curved.

      • White.

      • Bronze.

      • Alabaster.

      • Anodized.

      • Black.

    • 5.5 inch square.

      • White.

      • Bronze.

      • Alabaster.

      • Anodized.

      • Black.

    • 7 inch square.

      • White.

      • Bronze.

      • Alabaster.

      • Anodized.

      • Black.

    • Internal Hembar. Aluminum extrusion enclosed in a fabric hem pocket with heat-welded seams and ends to match shade cloth selection

    • External Hembar. Oval hem bar with end caps.

      • White.

      • Bronze.

      • Alabaster.

      • Anodized.

      • Black.

    • Slim Hembar. Slim hem bar with end caps. To be used with side channel and sill.

      • White.

      • Bronze.

      • Alabaster.

      • Anodized.

      • Black.

    Headbox: Aluminum alloy extrusion with removable closure panel to minimize slot for shade passage but allowing access to shade for maintenance. Can be used without closure. Powder coat finish.

    • Mounting:

      • Inside pocket in ceiling.

      • Mounted to ceiling grid.

      • Mounted to surface of ceiling.

    • Finish:

      • White Powder Coat.

    • Internal Hembar. Aluminum alloy extrusion.

    • External Hembar. Oval hem bar with end caps.

      • White.

      • Bronze.

      • Alabaster.

      • Anodized.

      • Black.

    • Slim Hembar. Slim hem bar with end caps. Needs to be used with side channel and sill.

      • White.

      • Bronze.

      • Alabaster.

      • Anodized.

      • Black

    Enclosed Hembar: Aluminum alloy extrusion enclosed in a fabric hem pocket with heat-welded seams and ends to match shade cloth selection.

    Shade fabric color and openness as selected by Architect from fabricator's available selections.

PERFECT FIT® SYSTEM

  • Configuration:

    • Single Shades

    • Manual Shades

    Mounting Requirements:

    • Inside Mount:

      • Mount on window sash.

      • Mount on door window lite.

    Mounting Brackets: Spring steel. Size depends on window sash/door window lite frame depth. Size to be determined at time of measurement.

    Bracket Colors:

    • Silver

    • White

    • Brown

    Roller Blind Frame:

    • White

    • Anodized

    • Bronze

    • Grey

    Width:

    • Minimum Width 13.8 inches (351 mm),

    • Maximum Width: 57 inches (1448 mm)

    Drop:

    • Minimum Drop 10 inches (254 mm)

    • Maximum Drop: 67 inches (1575 mm).

    Hembar:

    • White

    • Bronze

    • Anodized

    • Black

    • Fabric Wrapped Hembar

    Shade fabric color and openness as selected by Architect from fabricator's available selections.

  • Slats:

    • Aluminum Heat Treated and Tempered, 1 inch (25 mm) wide by .006 inch thick.

    • Premium Aluminum Heat Treated and Tempered, 1 inch (25 mm) wide by .008 inch thick.

    Maximum Width: 62 inches (1575 mm)

    Maximum Drop: 62 inches (1575 mm)

    Slat Spacing: 22.5 mm spacing with approximately 13 slats per foot of drop.

    Mounting Requirements - Inside Mount:

    • Mount on window sash.

    • Mount on door window lite.

    Mounting Brackets: Spring steel. Size depends on window sash/door window lite frame depth. Size to be determined at time of measurement.

    • 20 mm recess: 1-3/16 inches by 1-1/8 inches by 3/4 inch.

    • 24 mm recess: 1-3/16 inches by 1-1/4 inches by 3/4 inch.

    Bracket Colors:

    • Silver

    • White

    • Brown

    Tilt Control Manual:

    • Tilt Only-Left side of Headrail.

    • Tilt Only-Right side of Headrail.

    Venetian Blind Frame:

    • White

    • Anodized

    • Bronze

    • Grey

    Slat color as selected by Architect from fabricator's available selections.

  • Single Cell light filtering shade:

    • Material: High Quality Spun lace non-woven 100 percent polyester fabric.

      • Single Cell 3/8 inch.

      • Treated to meet NFPA 701 fire retardant standards.

      • Color as selected by Architect from fabricator's available selections.

    Single Cell Darkening shade:

    • Material: High Quality Spun lace non-woven 100 percent polyester fabric.

      • Single Cell 3/8 inch.

      • Color as selected by Architect from fabricator's available selections.

      • Treated to meet NFPA 701 fire retardant standards.

    Maximum Width: 72 inches (1829 mm).

    Maximum Drop: 126 inches (3200 mm).

    Mounting Requirements - Inside Mount:

    • Mount on window sash.

    • Mount on door window lite.

    Mounting Brackets: Spring steel. Size depends on window sash/door window lite frame depth. Size to be determined at time of measurement.

    • 20 mm recess: 1-3/16 inches by 1-1/8 inches by 3/4 inch.

    • 24 mm recess: 1-3/16 inches by 1-1/4 inches by 3/4 inch.

    Bracket Colors:

    • Silver

    • White

    • Brown

    Pleated Blind Frame:

    • White

    • Anodized

    • Bronze

    • Grey

COMMERCIAL COLLECTION

  • Shade fabric color and openness as selected by Architect from fabricator's available selections.

    • 1011; Color: White, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 72 inches, 98 inches and 118 inches.

    • 1012; Color: White Linen, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 72 inches, 98 inches and 118 inches.

    • 1013; Color: White Pearl, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 72 inches, 98 inches and 118 inches.

    • 1014; Color: Linen, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 72 inches, 98 inches and 118 inches.

    • 1015; Color: Ebony, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 72 inches, 98 inches and 118 inches.

    • 1016; Color: Brown Chocolate, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 72 inches, 98 inches and 118 inches.

    • 4801; Color: Off White, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 72 inches, 98 inches and 118 inches.

    • 4802; Color: Beige White, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 72 inches, 98 inches and 118 inches.

    • 4805; Color: Beige, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 72 inches, 98 inches and 118 inches.

    • 4816; Color: Charcoal Bronze, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 72 inches, 98 inches and 118 inches.

    • 4826; Color: Gray White, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 72 inches, 98 inches and 118 inches.

  • Shade fabric color and openness as selected by Architect from fabricator's available selections.

    • 1031; Color: White, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 72 inches, 98 inches and 118 inches.

    • 1032; Color: White Linen, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 72 inches, 98 inches and 118 inches.

    • 1033; Color: White Pearl, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 72 inches, 98 inches and 118 inches.

    • 1034; Color: Linen, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 72 inches, 98 inches and 118 inches.

    • 1035; Color: Ebony, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 72 inches, 98 inches and 118 inches.

    • 1036; Color: Brown Chocolate, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 72 inches, 98 inches and 118 inches.

    • P2211; Color: Charcoal Bronze, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 72 inches, 98 inches and 118 inches.

    • P2212; Color: Charcoal Gray, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 72 inches, 98 inches and 118 inches.

    • P2213; Color: Brown Charcoal, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 72 inches, 98 inches and 118 inches.

  • Shade fabric color and openness as selected by Architect from fabricator's available selections.

    • 1051; Color: White, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 98 inches and 118 inches.

    • 1052; Color: White Linen, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 98 inches and 118 inches.

    • 1053; Color: White Pearl, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 98 inches and 118 inches.

    • 1054; Color: Linen, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 98 inches and 118 inches.

    • 1055; Color: Ebony, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 98 inches and 118 inches.

    • 1056; Color: Brown Chocolate, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 98 inches and 118 inches.

    • 1057; Color: Taupe, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 98 inches and 118 inches.

    • 2101; Color: White, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 72 inches, 98 inches and 118 inches.

    • 2211; Color: Charcoal Bronze, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 72 inches, 98 inches and 118 inches.

    • 2212; Color: Charcoal Gray, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 72 inches, 98 inches and 118 inches.

    • 2213; Color: Charcoal, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 72 inches, 98 inches and 118 inches.

  • Shade fabric color and openness as selected by Architect from fabricator's available selections.

    • 4201; Color: Off White, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 72 inches, 98 inches and 118 inches.

    • 4202; Color: Beige White, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 72 inches, 98 inches and 118 inches.

    • 4205; Color: Gray White, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 98 inches and 118 inches.

    • 4211; Color: Bronze Charcoal, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 98 inches and 118 inches.

    • 4212; Color: Gray, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 98 inches.

    • 4213; Color: Charcoal, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 98 inches.

    • 4221; Color: Gray Check, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 98 inches.

    • 4222; Color: Beige, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 98 inches.

    • 4223; Color: Multi, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 98 inches.

  • Shade fabric color and openness as selected by Architect from fabricator's available selections.

    • 1101; Color: White, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 72 inches, 98 inches and 118 inches.

    • 1102; Color: White Linen, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 72 inches, 98 inches and 118 inches.

    • 1103; Color: White Pearl, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 72 inches, 98 inches and 118 inches.

    • 1104; Color: Linen, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 72 inches, 98 inches and 118 inches.

    • 1105; Color: Ebony, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 72 inches, 98 inches and 118 inches.

    • 1106; Color: Brown Chocolate, Fire Rating: NFPA 701-99, GREENGUARD, Oeko-Tex 100. Available Widths: 72 inches, 98 inches and 118 inches.

  • Shade fabric color and openness as selected by Architect from fabricator's available selections.

    • 7001; Color: Frost, Fire Rating: NFPA 701-99, PVC Free, Available Widths: 110 inches.

    • 7002; Color: Eggshell, Fire Rating: NFPA 701-99, PVC Free, Available Widths: 110 inches.

    • 7003; Color: French Vanilla, Fire Rating: NFPA 701-99, PVC Free Available Widths: 110 inches.

    • 7004; Color: Buff, Fire Rating: NFPA 701-99, PVC Free, Available Widths: 110 inches.

    • 7005; Color: Earl Gray, Fire Rating: NFPA 701-99, PVC Free, Available Widths: 110 inches.

    • 7006; Color: Onyx, Fire Rating: NFPA 701-99, PVC Free, Available Widths: 110 inches.

  • Shade fabric color and openness as selected by Architect from fabricator's available selections.

    • 2921; Color: White, Fire Rating: NFPA 701-99, Available Widths: 72 inches 96 inches and 108 inches.

    • 2922; Color: Linen, Fire Rating: NFPA 701-99, Available Widths: 72 inches 96 inches and 108 inches.

    • 2923; Color: Fawn, Fire Rating: NFPA 701-99, Available Widths: 72 inches 96 inches and 108 inches.

    • 2924; Color: Champagne, Fire Rating: NFPA 701-99, Available Widths: 72 inches 96 inches and 108 inches.

    • 2925; Color: Gray, Fire Rating: NFPA 701-99, Available Widths: 72 inches 96 inches and 108 inches.

    • 7101; Color: Frost, Fire Rating: NFPA 701-99, PVC Free, Available Widths: 110 inches.

    • 7102; Color: Eggshell, Fire Rating: NFPA 701-99, PVC Free, Available Widths: 110 inches.

    • 7103; Color: French Vanilla, Fire Rating: NFPA 701-99, PVC Free, Available Widths: 110 inches.

    • 7104; Color: Buff, Fire Rating: NFPA 701-99, PVC Free, Available Widths: 110 inches.

    • 7105; Color: Earl Gray, Fire Rating: NFPA 701-99, PVC Free, Available Widths: 72 inches 96 inches and 108 inches.

    • 7106; Color: Onyx, Fire Rating: NFPA 701-99, PVC Free, Available Widths: 110 inches.

ADDITIONAL Information:

  • Manufacturer's Limited Lifetime Warranty for residential use.

  • Examination:

    • Do not begin installation until substrates have been properly prepared.

    • If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.

    Preparation:

    • Coordinate requirements for blocking and structural supports to ensure adequate means for installation of window treatments.

    • Coordinate requirements for blocking, construction of pockets, and structural supports to ensure adequate means for installation of window treatments.

    • Coordinate installation of recessed shade pockets with construction of suspended gypsum board ceilings specified in Section 09 21 16.33 - Gypsum Board Area Separation Wall Assemblies.

    • Coordinate requirements for power supply conduit, and wiring required for window shade motors and controls.

    • Clean surfaces thoroughly prior to installation.

    • Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.

    Installation:

    • Install in accordance with manufacturer's instructions.

    Adjustment and Demonstration:

    • Adjust all units prior to project closeout.

    • At project closeout, demonstrate proper adjustment, usage, cleaning and maintenance procedures to the owner or owner's representative

    Protection:

    • Protect installed products until completion of project.

    • Touch-up, repair or replace damaged products before Substantial Completion.

  • Section 06 10 00 - Rough Carpentry.

    Section 06 20 00 - Finish Carpentry.

    Section 08 54 13 - Fiberglass Windows.

    Section 09 21 16.33 - Gypsum Board Area Separation Wall Assemblies.

    Section 09 51 23 - Acoustical Tile Ceilings.

    Section 12 25 13 - Motorized Drapery Rods.

    Division 16 - Electrical: Electrical supply, conduit, and wiring for motorized window shades.

  • NFPA 70 - National Electrical Code.

    NFPA 701 - Standard Methods of Fire Tests for Flame Propagation of Textiles and Films.

    GreenGuard Low Emitting Interior Products.

    ANSI/WCMA A100.1-2012 - American National Standard for Safety of Corded Window Covering Products.

  • Submit under provisions of Section 01 30 00 - Administrative Requirements Submittal Procedures.

    Manufacturer's data sheets on each product to be used, including:

    • Preparation instructions and recommendations.

    • Storage and handling requirements and recommendations.

    • Mounting details and Installation methods.

    • Typical wiring diagrams including integration of motor controllers with building management system, audiovisual and lighting control systems as applicable.

    Shop Drawings:

    • Submit plans, elevations, sections, product details, installation details, operational clearances and relationship to adjacent work

    LEED Submittals: Provide documentation of how the requirements of Credit will be met:

    • Data on Recycling Content Credits available for the products specified.

    • Data on Daylight Credits available for the products specified.

    • Data on Energy Optimization Performance Credits for the products specified.

    • Data on Indoor Environmental Quality Credits for the products specified.

    • Data on Regional Manufacturing Credits, which may be available for the project location.

    Selection Samples:

    • For each finish product specified, two complete sets of color chips representing manufacturer's full range of available colors and patterns.

    Verification Samples:

    • For each finish product specified, two samples, minimum size 6 inches (150 mm) square, representing actual product, color, and patterns.

    Manufacturer's Certificates:

    • Certify products meet or exceed specified requirements.

    Closeout Submittals:

    • Provide manufacturer's maintenance instructions that include recommendations for periodic checking and adjustment of cable tension and periodic cleaning and maintenance of all railing and infill components.

  • Manufacturer Qualifications:

    • A fabricator capable of demonstrating at least 10 years' documented experience successfully fabricating window treatments on projects of similar type and scope as specified in this section.

    Installer Qualifications:

    • Capable of demonstrating at least 5 years' experience successfully installing window treatments on projects of similar type and scope as specified in this section.

    Mock-Up:

    • Provide a mock-up for evaluation of surface preparation techniques and application workmanship.

      • Locate where designated by Architect.

      • Do not proceed with remaining work until workmanship, color, and sheen are approved by Architect.

      • Refinish mock-up area as required to produce acceptable work.

  • Do not deliver products until building is enclosed and construction within spaces where product will be installed is substantially complete.

    Deliver and store products in manufacturer's unopened packaging until ready for installation.

    In accordance with manufacturer's instructions, store materials in manufacturer's unopened packaging in a clean area, free of corrosive fumes and dust, and away from construction activities until ready for installation.

    Stack materials horizontally using plastic or wood shims to allow for proper and adequate drainage and ventilation

  • Ensure that locating templates and other information required for installation of products of this section are furnished to affected trades in time to prevent interruption of construction progress.

    Ensure that products of this section are supplied to affected trades in time to prevent interruption of construction progress.

  • Verify dimensions of adjoining construction by field measurements before manufacturing. Allow clearance for operable glazed unit's operation hardware.

    Install only after paint and finish work is completed, air conditioning is operational and air temperature are maintained between 60 and 85 degrees F and between 45 and 85 percent RH.

This section is based on the products of A&I Manufacturing
Substitutions not permitted. Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.
Location:
17476 147th St SE Suite E Monroe, WA 98272
Contact:
Toll Free: 800-335-7105Phone: 360-805-8200Fax: 360-805-9255Email: info@a-imanufacturing.net